ALLOY 600 | UNS N0660
Description
Alloy 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000°F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures.
Specifications Stocked
| Form Name | Size Range | Schedules | Specifications |
|---|---|---|---|
| Seamless Pipe | 1/2″ – 8″ | 10S, 40S, 80S, 160 | ASTM B167 / ASME SB167 |
| Buttweld Fittings | 1/2″ – 8″ | 10S, 40S, 80S | ASTM B366 / ASME SB366 |
| Flanges | 1/2″ – 12″ | 150#, 300# | ASTM B564 / ASME SB564 |
| Pressure Fittings | 1/2″ – 2″ | 3000#, THRD/SW | ASTM B564 / ASME SB564 ASTM B366 / ASME SB366 |
Limiting Chemical Composition %
|
C |
Cr |
Cu |
Fe |
Mg |
N |
S |
Si |
|---|---|---|---|---|---|---|---|
|
MAX |
14.0 – 17.0 |
MAX |
6.00 – 10.00 |
MAX |
MIN |
MAX |
MAX |
Typical Industrial Applications
- Chemical industry
- Aerospace
- Heat treating industry
- Pulp and paper industry
- Food processing
- Gas turbine components
Tensile Requirements
|
Tensile Strength |
Yield Strength |
|---|---|
|
80 |
35 |
NOTE: The information and data in this product data sheet have been compiled from a variety of sources, and should be considered as a general guide only. The information and data included are accurate to the best of our knowledge, and may be revised at any time without notice. Energy Metals Inc. assumes no responsibility for the accuracy of this information.