316/316H | UNS S31609
Description
Grade 316H stainless steel is a higher carbon version of 316 stainless steel. This alloy can be used at elevated temperatures. Increased carbon content provides higher tensile and yields strength. The austenitic microstructure gives toughness even at cryogenic temperature. It offers moderate corrosion resistance in chloride environments. 316H is non-magnetic in nature. It cannot be hardened by heat treatment and can be easily welded and fabricated.
Specifications Stocked
| Form Name | Size Range | Schedules | Specifications |
|---|---|---|---|
| Welded Pipe | Contact Us | ||
| Seamless Pipe | Contact Us | ||
| Buttweld Fittings | Contact Us | ||
| Flanges | Contact Us | ||
| Pressure Fittings | Contact Us |
Limiting Chemical Composition %
|
C |
Cr |
Mn |
Mo |
Ni |
P |
S |
Si |
|---|---|---|---|---|---|---|---|
|
MAX |
16.0 – 20.0 |
MAX |
2.0 – 3.0 |
10.0 – 15.0 |
MAX |
MAX |
MAX |
Typical Industrial Applications
- Nuclear
- Chemical processing
- Rubber
- Plastics
- Pulp/paper
- Pharmaceutical and textile industries
- Heat exchangers, condensers and evaporators
Tensile Requirements
|
Tensile Strength |
Yield Strength |
|---|---|
|
70 |
25 |
NOTE: The information and data in this product data sheet have been compiled from a variety of sources, and should be considered as a general guide only. The information and data included are accurate to the best of our knowledge, and may be revised at any time without notice. Energy Metals Inc. assumes no responsibility for the accuracy of this information.