254 SMO | UNS S31254
Description
254 SMO is an austenitic steel designed for maximum resistance to pitting and crevice corrosion. With high levels of chromium, molybdenum and nitrogen, 254 SMO is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants and other high-chloride process streams. In new construction, 254 SMO has been found in many cases to be technically adequate and much less costly substitute for nickel-based alloys and titanium. 254 SMO is readily fabricated and welded.
Specifications Stocked
| Form Name | Size Range | Schedules | Specifications |
|---|---|---|---|
| Welded Pipe | Contact Us | ASTM A312 / ASME SA312 | |
| Seamless Pipe | Contact Us | ASTM A312 / ASME SA312 | |
| Buttweld Fittings | Contact Us | ASTM A403 / ASME SA403 | |
| Flanges | Contact Us | ASTM A182 F44 / ASME SA182 F44 | |
| Pressure Fittings | Contact Us | ASTM A182 F44 / ASME SA182 F44 |
Limiting Chemical Composition %
|
C |
Cr |
Cu |
Mn |
Mo |
N |
Ni |
P |
Si |
S |
|---|---|---|---|---|---|---|---|---|---|
|
MAX |
19.5 – 20.5 |
0.5 – 1.0 |
MAX |
6.0 – 6.5 |
0.18 – 0.22 |
17.5 – 18.5 |
MAX |
MAX |
MAX |
Typical Industrial Applications
- Seawater handling equipment
- Pulp mill bleach systems
- Tall oil distillation columns and equipment
- Chemical processing equipment
- Food processing equipment
- Desalination equipment
- Flue gas desulfurization scrubbers
Tensile Requirements
|
Tensile Strength |
Yield Strength |
|---|---|
|
94 |
44 |
NOTE: The information and data in this product data sheet have been compiled from a variety of sources, and should be considered as a general guide only. The information and data included are accurate to the best of our knowledge, and may be revised at any time without notice. Energy Metals Inc. assumes no responsibility for the accuracy of this information.