DUPLEX 2205 | UNS S31803/S32205
Description
Duplex 2205 is a chromium molybdenum blend which combines properties of both ferritic and austenitic steels. Having both a high resistance to corrosion fatigue, corrosion cracking, and erosion, Duplex 2205 is used in oil and gas, desalination plants, and industries handling chlorides.
Specifications Stocked
| Form Name | Size Range | Schedules | Specifications |
|---|---|---|---|
| Welded Pipe | 4″ – 24″ | 10S, 20S, 40S, 80S | ASTM A790 / ASME SA790 |
| Seamless Pipe | 1/2″ – 12″ | 10S, 40S, 80S, 160, XXH | ASTM A790 / ASME SA790 |
| Buttweld Fittings | 1/2″ – 24″ | 10S, 40S, 80S, 160 | ASTM A815 / ASME SA815 |
| Flanges | 1/2″ – 24″ | 150#, 300#, 600# | ASTM A132 / ASME SA132 |
| Pressure Fittings | 1/2″ – 2″ | 3000# THRD/SW | ASTM A132 / ASME SA132 |
Limiting Chemical Composition %
|
C |
Cr |
Fe |
Mn |
Mo |
N |
Ni |
P |
S |
Si |
|---|---|---|---|---|---|---|---|---|---|
|
MAX |
21.0 – 23.0 |
Balance |
MAX |
2.50 – 3.50 |
0.08 – 0.20 |
4.50 – 6.50 |
MAX |
MAX |
MAX |
Typical Industrial Applications
- Chemical process vessels, piping and heat exchangers
- Pulp mill digesters, bleach washers, chip pre-steaming vessels
- Food processing equipment
- Oil field piping and heat exchangers
- Flue gas desulfurization equipment
Tensile Requirements
|
Tensile Strength |
Yield Strength |
|---|---|
|
65 |
90 |
NOTE: The information and data in this product data sheet have been compiled from a variety of sources, and should be considered as a general guide only. The information and data included are accurate to the best of our knowledge, and may be revised at any time without notice. Energy Metals Inc. assumes no responsibility for the accuracy of this information.